SiWx915 Specs
Low Power Wireless System on a Chip
- Wi-Fi 6 single band 2.4 GHz and Bluetooth Low Energy 5.1 wireless radio
- ARM® Cortex®-M4F application MCU up to 180 MHz
- Integrated baseband processor, RF transceiver, high-power amplifier, balun and T/R switch
- Integrated PSA-L2 certifiable security engine
- Embedded SRAM up to 672 KB
- Embedded Flash up to 4 MB and optional external flash support
Wi-Fi 6
- Compliant to 2.4 GHz, 20 MHz, single-spatial stream IEEE 802.11 b/g/n/ax
- Support for 802.11ax 20 MHz features such as OFDMA, MU-MIMO, and Target Wake Time (TWT)
- Transmit power up to +20 dBm with integrated PA
- Receive sensitivity as low as -98.5 dBm
- Data Rates: up to 143 Mbps (802.11ax MCS0 to MCS7)
- Operating frequency range: 2412 MHz - 2484 MHz
Bluetooth Low Energy 5.1
- Transmit power up to +20 dBm with integrated PA
- Receive sensitivity: LE: -95 dBm, LR 125 Kbps: -106 dBm
- Operating frequency range: 2402 MHz - 2480 MHz
- Bluetooth Low Energy 1 Mbps, 2 Mbps and Long-Range modes (125 kbps, 500 kbps)
Microcontroller Subsystem
- ARM® Cortex®-M4F core with up to 180 MHz
- Integrated FPU, MPU, and NVIC
- In-System Programming (ISP) and Over-the-Air (OTA) wireless firmware update
- Power-On Reset (POR), Brown/Black-out and Black-out Detection
- Rich set of Analog and Digital Peripherals
- Digital Peripherals - SDIO, 1x USART, 2x UART, 4x SPI, 3x I2C, 2x I2S, SIO, PWM, QEI
- Timers: 4x 16/32-bit, 1x 24-bit, WDT, RTC
- Up to 46 GPIOs (GPIO Multiplexer)
- Analog Peripherals - 12-bit 16-ch, 5 Msps ADC, 10-bit DAC
- 3x Op-amps 2x Comparators, IR detector and Temp Sensor, 8 capacitive touch sensor inputs
Best-in-Class Security
- PSA-L2 Certifiable
- QSPI Secure XIP from Flash (w/ AES-XTS)
- Secure Zone, Separated TEE
- TRNG, Root of trust (PUF)
- Secure Boot & OTA
- Advanced Cryptographic Accelerators
Low System Power Consumption
- Wi-Fi Standby Associated mode current: 120 μA @ 1-second interval
- Low MCU Sub-system active current: 19 μA/MHz in LP mode
Software and Protocol Support
- Integrated Wi-Fi stack, TCP/IP stack, Bluetooth stack supporting wireless coexistence
- Matter over Wi-Fi with Bluetooth LE commissioning
- Support for Embedded Client mode, Access Point mode (up to 8 clients), Concurrent Wi-Fi and Bluetooth LE mode
- Supports advanced Wi-Fi and Networking security features: WPA/WPA2/WPA3-Personal and Enterprise security
- Integrated TCP/IP stack supports HTTP/HTTPS, DHCP, SSL/TLS1.3, MQTT
- Wireless firmware upgrade and provisioning
- Supports both hosted modes (Transceiver and Network Co-processor (NCP) and host-less (SoC) modes
Operating Conditions
- Wide operating supply range: 1.75 V to 3.63 V
- Operating temperature: -40°C to +85°C
Package Size
- QMS: 6.00 mm x 6.00 mm x 0.85 mm
Development Environment
- Simplicity Studio v5
Whitepaper
Harnessing the Power of Wi-Fi 6 in the New Age of IoT
This whitepaper covers the rapid evolution of Wi-Fi over the last two decades and dive into the value of Wi-Fi 6 for IoT devices.