RS9113-N00-DXF-EVB

Development Kit Contents:

• RS9113 Module Evaluation Board
• USB Pen Drive
• Micro A/B-type USB cable
• SDIO Adaptor Cable
• SPI Adaptor Cable
  
• Female - Female Cables

Kit Features:

• *FIPS 140-2 Level 1 Certification for modules with and without antenna
• FIPS Approved and non-FIPS Approved modes of operation
• 802.11 a/b/g/n operation over 2.4 GHz and 5 GHz bands
• Two module variants: with and without integrated antenna
• Ultra low power operation with power save modes
• Module supports single supply
  3.0 to 3.6 V operation
  

Network Standard Support:

• IEEE 802.11 a/b/g/n, 802.11d/e/i
  

Data Rates:

• 802.11n: from 6.5 Mbps to 72.2 Mbps (MCS 0-7)
• 802.11a/g: from 6 Mbps to 54 Mbps
• 802.11b: from 1 Mbps to 11 Mbps
  

Modulation Techniques:

• OFDM with BPSK, QPSK, 16-QAM, 64-QAM
• 802.11b with CCK and DSSS

802.11n Advanced Features:

• 1-SS
• Greenfield Preamble
• Short-GI
• 1 spatial stream
• STBC
• RIFS
• A-MSDU
• A-MPDU
• Aggregation with Block-ack
• A-MSDU inside
• A-MPDU
• Virtual AP support
  

TCP/IP Features:

• IPv4 and IPv6
• DHCP Server/Client
• HTTP Server/Client
• Static and Dynamic Webpages with JSON Objects (for HTML Server)
• ICMP
• Websockets
• DNS Client
• IGMP
• SNMP
  

FIPS Approved Algorithms:

• AES with 128-bit key and 256-bit key in CBC mode Encrypt/Decrypt
  • Key wrapping (Cert. #3299)
  • AES CCM (Cert. #3300)
  • AES-128 CMAC (Cert. #3316)
  • SHA-1, 256 (Cert. #2628)
• HMAC-SHA1 and HMAC-SHA256 (Cert. #2003)
• RSA PKCS#5 v1.5 with 2048-bit key and SHA-256 for Digital Signature
• Generation/Verification (Cert. #1689)
• SP800-90 DRBG HASH_DRBG (Cert. #754)
• SP800-108 KDF (Cert. #50)
• CVL: SP800-135 TLS v1.0 KDF (Cert. #474)

Non-approved Algorithms allowed in FIPS mode:

• Hardware non-deterministic random number generator (for seeding Approved DRBG)
• Diffie-Hellman (key agreement; key establishment methodology provides 112 bits of encryption strength)
• RSA (key wrapping; key establishment methodology provides 112 bits of encryption strength)
  

Non-approved Algorithms, allowed only in non-FIPS mode:

• RC4
  
• DES
  
• MD4
  
• MD5

Power-up Self Tests in FIPS mode:

• Cryptographic Algorithm Tests:
  • SHA1 KAT
  •  SHA256 KAT
  • HMAC-SHA1 KAT
  • HMAC-SHA256 KAT
  • RSA 2048 Signature Generation KAT
  • RSA 2048 Signature Verification KAT
  • AES-128 CBC Encrypt KAT
  • AES-128 CBC Decrypt KAT
  • AES-256 CBC Encrypt KAT
  • AES-256 CBC Decrypt KAT
  • SP800-38F AES Key Wrap Encrypt KAT
  • SP800-38F AES Key Wrap Decrypt KAT
  • SP800-90 DRBG KAT
  • SP800-135 TLS KDF KAT
  • SP800-108 KDF KAT
  • ES-CCM KAT
• Software/Firmware Tests:
  
  • Firmware integrity test (32-bit checksum)
  • Boot-loader integrity test (32-bit checksum)
    
• Critical Functions Tests:
  • SHA1 checksum of configuration parameters
    

Conditional Tests in FIPS mode:

• Firmware load test: AES CMAC Test
• Manual key entry test: 256-bit PSK
• Continuous random number generator tests
  • Continuous test on SP800-90 DRBG
  • Continuous test on non-Approved NDRNG

Regulatory Certification:

• FCC (ID is XF6-RS9113DB)
• IC (ID 8407A-RS9113DB)
• CE/ETSI
• TELEC
• SRRC
  

Typical Transmit Power(+/-2 dBm):

• Wi-Fi: 18 dBm for 802.11b DSSS
• 17 dBm for 802.11g/n OFDM
• 12 dBm for 802.11a/n OFDM
  

RX sensitivity (+/- 1dBm):

• Wi-Fi: 1Mbps -97 dBm (< 8% PER)
• 54 Mbps -76.5 dBm (< 10% PER)
• MCS7 -73 dBm (< 10% PER)