Si3000 Voice Codecs

Si3000 is a complete voice I/O solution and is ideal for low-power applications, such as handsets in multi-function printers. The device can be connected directly to any high-speed, ISOmodem system-side chip to support a telephone handset. An extended AT command set is available to control the Si3000.

In addition to a codec (A/D, D/A), Si3000 integrates a microphone preamplifier, three-input mixer, +12.5 to –34.5 dB of programmable gain, headphone/speaker driver and an integrated handset hybrid for direct connection to a two-wire telephone handset. Programmable gain and attenuation settings are available on both the A/D converter and the D/A converter signal paths with 1.5 dB step resolution and is implemented using a zero crossing technique to enable “click-free” level transitions. Operation is from a single +5 V or a single +3.3 V power supply. 

Voice I/O for ISOmodems
Low-profile package
16-pin small outline (SOIC)

Si3000 Common Specs

  • 84 dB dynamic range A/D and D/A converter with 16-bit resolution
  • Microphone input; programmable gain of 0, +10, +20, +30 dB
  • Line level input (1 V RMS)
  • 3:1 analog input mixer
  • Integrated handset hybrid
  • Digital input/output gain; programmable range of +12.5 to –34.5 dB
  • Line level output (1 V RMS)
  • Headphone output capable of driving a 32 ohm load
  • 1.5 dB step resolution
  • 50 mW power consumption
  • Low-profile 16-pin small outline package (SOIC)
Find the Right Si3000 Device Select Columns
Select Columns
Part Number Package Type Microphone Amplifier Headphone Driver Handset Hybrid

Sort A -> Z
Sort Z -> A

Filter by values...

Loading Results