Si87xx Optocoupler Replacement Isolators

Si87xx devices isolate high-speed digital signals and offer performance, reliability, and flexibility advantages unavailable with competing optocoupler products. Si87xx products are based on our proprietary CMOS isolation technology for low-power and high-speed operation, providing longer service life and dramatically higher reliability compared to traditional optocouplers. Si87xx isolators are resistant to the wear-out effects found in optocouplers, which degrade performance with increasing temperature, forward current, and device age.  

Si87xx isolators are pin-compatible, single-channel, drop-in optocoupler replacements with data rates up to 15 Mbps. Ordering options include open collector or push-pull outputs with and without integrated pull-up resistor and output enable pin.

Optocoupler compatibility
Pin-to-pin
Propagation delay
5x lower than optos

Common Specs

  • Pin-compatible, drop-in upgrades for popular high-speed digital optocouplers
  • Performance and reliability advantages vs. optocouplers
    • Resistant to temperature, age, and forward current effects
    • 10x lower FIT rate for longer service life
    • Higher common-mode transient immunity: >50 kV/μs typical
    • Lower power and forward input diode current
  • PCB footprint compatible with optocoupler packaging
  • Wide range of product options
  • Diode emulator input
  • 3 to 30 V open collector output
  • Propagation delay 30 ns typical
  • Data rates from dc to 15 Mbps
  • 3.75 and 5 kV reinforced isolation
  • UL, CSA, and VDE certifications
  • Wide operating temperature range –40 to +125 °C
  • RoHS-compliant packages

Status

Find the Right Si87xx Device Select Columns
Select Columns
Part Number Isolation Rating (kVrms) 10 kV Surge Enable Control Package Type Max Data Rate (Mbps) Default Output State Integrated Pull-Up AEC-Q100

Sort A -> Z
Sort Z -> A

Filter by values...

Close
Loading Results
Close
STAGING-PUB1